Building Your Own Super Computer USING Parts Purchased in Part 1/2!

Hi everyone, sorry again for being absent Thursday really wanted to finish this post and kept thinking of all my readers depending on my incredibly well thought out instructions to build their super computers!!! But alas! here I am and here is the second addition to: How to Build Your Own Super Computer.

Phase IV: Motherboard and Microprocessor

CAUTION: Do not shock your computer parts when installing them! When installing these parts into your computer it is imperative that you ground yourself while working. You can buy an anti-static bracelet in case you want to be doubly sure you don’t ruin your hard bought items.

So now that we have all computer parts purchased, we can finally start assembling this beast you might call a machine. The first phase involved in assembly are the motherboard, ram and microprocessor components. Unwrap the motherboard and microprocessor. Now, find the microprocessor socket on the mother motherboard and align the marked corner of the chip to the marked corner of the socket on the motherboard, and your done with the microprocessor!

Next is the heat sink installation. The heat sink is the medium that prevents your CPU from overheating when in use. Basically it is the unit responsible from transferring the heat your CPU generates as energy into liquid form using a type of coolant and thermal grease to maximize this effect. Evey heat sink is different but they all come with instructions that are usually easy to follow.

Lastly, we are going to install RAM. When installing RAM I have always been told to make sure you install each stick starting with the closest slot to the CPU and moving upwards. For this exercise just make sure the stick is correctly installed and you hear it click into place starting with the slot labeled 1. Your RAM slots should be numbered. Now we go to the case!

Phase V: Case Assembly

So now we actually have assembled one of the most important parts to your computer. The motherboard/CPU unit! You must feel so proud of yourself, well put the pause button on your congratulatory moment because we aren’t done.

Here is what the heatsink mounted above the CPU mounted onto the motherboard looks like.

Take the faceplate included with your motherboard purchase and click it into place in the corresponding holes on the case, Next take the spacers and screws also included with your mobo and place them into the corresponding holes on the case. First, place in the spacers, then align the mobo with the faceplate you clicked in a step ago and then screw in the screws through the spacers into the mobo.

SIDENOTE: Make sure when installing your mobo you DO NOT screw in the motherboard too tightly butallow it to be “nestled” into the screws. Also ensure that NONE of the mobo cables touch (even lightly) your case it can ruin the whole board. Lastly DO NOT drop the screws on mobo!!! You can damage the wiring of the mobo and ruin it.

Phase VI: Power Supply

I understand the PSU is installed inside the case along with the mobo and RAM but it is important enough to me to consider it a separate step (HEART you PSU!). Anyways back to work. So there are two sides to a Power Supply Unit. There is the back (fan side) and the front (wire side). In case you have never seen where a PSU should be located look for a cut square/rectangular cut out area on the top left/right side of the case.

Next situate your PSU on its brackets keeping it in place while you screw it in using screws that came with the unit.The fan side should be facing outside the case while the wire side facing inside the case.After installing it correctly, attach the power leads from the PSU to the correct areas on the mobo. There is a big one and a small one. After connecting these leads the rest of the wires should be color coded to match their correct ports. When in doubt look at the manual that undoubtedly came with your PSU.  That is it for your PSU we are almost done!

Phase VII: HDD Installation

Now we are ready to install your HDD (Hard Drive Disk). When you purchased your computer case it also should have come with brackets for your HDD. These brackets should make for a snug fit with your HDD and the screws that also came with the computer case should be used to screw the HDD into these brackets.

HDD installation into HDD brackets.

After screwing in the HDD into the brackets place the brackets back into its slot inside your case and connect the HDD into your PSU through the correct connector and connect the other HDD cables to the mobo. The red striped cable is “pin 1”. Get the marked “pin 1” side of the red striped cable and find the “pin 1” port on the motherboard and click it in. Your HDD is now correctly installed.

Phase VIII: (LAST PHASE!) Installing the CD-Rom Drive

We are finally almost done! I’m excited.  So now we are going to install your CD-Rom/DVD/Blue Ray drives correctly and make sure they don’t fall apart when you start using them. Locate the faceplate or rectangular slot located on the front of your computer case.

Now either connect it to your PSU (any available connector will work) or screw it into place with the face of your drive facing outside within the opening. Then connect the OTHER red striped cable that should have come with your CD-Rom and connect the red stripe marked side of the cable to your mobo.

Lastly! connect the audio cable that also came with your mobo and ensure that it securely connects to the indicated audio port on your motherboard and you are DONE!

Congratulations! on completing your first working computer! I hope it does work if in the off-chance it does not work please go here. It seemed to be a great thread post regarding issues someone had with a computer they just built so it definitely might help you.

Enjoy your AWEsome new computer you tech savvy genius you!

 
EZPC Recycling, Inc.
CEO, Miguel Bautista
Mzuniga@EZPCRecycle.com
 
www.ezpcrecycle.com

Don't forget us when you throw away your used computer parts!

Advertisements